- High-concerned chemical: None
- Is Electric: No Battery
- Quantity: 1 pcs
- Is it battery/power supply: N
- Is it charger/adapter: N
- Is Batteries Included: No
- Size: 30.5×30.5mm
- Technical parameters: value 3
- Model Number: F722 F7 / F405 F4
- For Vehicle Type: Airplanes
- Tool Supplies: Cutting
- Four-wheel Drive Attributes: Assemblage
- Remote Control Peripherals/Devices: RECEIVERS
- Upgrade Parts/Accessories: Frame
- RC Parts & Accs: Speed Controllers
- Material: Composite Material
- Brand Name: Readytosky
- Origin: Mainland China
- Recommend Age: 14+y
- Use: Vehicles & Remote Control Toys
Item Description :
F4 F405 Flight Controller:
Product Parameters:
MCU: STM32F405RGT6 168MHz
Gyroscope: Mpu6500/ICM42688 (send at random)
Baro:DPS310/SPL06-001/LQTP001HTA (send at random)
OSD: Betaflight SPI OSD DJI HD OSD(UART5)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 12V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)
1x JST-SH1.0_6pin connector (12V/GND/T5/R5/GND/R2)
VTX 12V filtered power
DJI FPV OSD is supported by any spare UART
LED: 4 LED independent pads, support WS2812 programming lamp output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
The default receiver input is UART2(You can solder ELRS RX on UART2).
Power:
Input voltage: 3-6S
BEC: 5V/12V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LDO 3.3V: Max.1A
FC Firmware:
BetaFlight firmware: DAKEFPVF405
INAV firmware:DAKEFPVF405
Mounting:
Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
External size 36mm × 36mm
Flight control weight: 6.9g
Flight control onboard voltage sensor.
F7 Flight Controller Specifications:
Name: F7 F722 flight controller
Main control chip: STM32F722RET6
MPU: Mpu6500/ICM42688 (send at random)
Character overlay: AT7456E
Black box: integrated 16M Flash
Baro:DPS310/SPL06-001/LQTP001HTA (send at random)
Serial port: 6 optional
Motor output: 6 channels optional
LED strip: support
Buzzer: support
Camera_Control：support
Input voltage: 3-6S Lipo
Power output: 5V/2A, 12V/2A
Weight: 6.0g
Size: 36x36mm, mounting hole 30.5mm
Firmware: DAKEFPVF722
60A BLHeli-S 3-6S DShot600 4-in-1 ESC:
Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
Power supply voltage: 3-6S (12-26V)
Continuous working current: 60A
No built-in 5V BEC output
Firmware: BLHeli-S
Screw hole spacing: 30.5*30.5MM
Aperture: 4MM
Weight: 14.6g
– The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
– EMI Shell provides stronger anti-interference capability.
Note :there are two kinds of esc board , will send at random
Package including:
Picture of F722 flight controller 
Picture of F405 flight controller 
F4 +60A Flytower set :
F7 +60A Flytower set :
Avis
Il n’y a pas encore d’avis.